Courses


  • CISRS CPD Scaffolder / Advance Scaffolder Renewal

    TUESDAY, SEPTEMBER 1 2026 | 8:00 AM

    From the 1st July 2017, it is a requirement of the CISRS Training scheme, that CISRS Scaffolders and Advance Scaffolder card holders must attend a 2-day Scaffolder Refresher/ CPD course in order to renew their CISRS cards. Renewal is required every 5 years.

    View course

  • Part 2 (Tube & Fitting)

    MONDAY, AUGUST 17 2026 | 8:00 AM

    The 10-day Part 2 course is the second part of the required CISRS training for the Scaffolder card. Part 2 can only be accessed when Part 1 has been successfully completed, and 6 months experience has been gained following the Part 1 course. A second Trainee card can be applied for.

    View course

  • Abrasive Wheels

    WEDNESDAY, JULY 15 2026 | 8:30 AM

    This half day course is designed to help engineers know the correct methods when handling Abrasive Wheels. This will include handling, maintaining, checking for hazards and the correct methods of removing and re-installing Abrasive Wheels.

    View course

  • CISRS New Entrant Constructions Operatives Training Scheme (COTS)

    MONDAY, AUGUST 10 2026 | 8:00 AM

    The course is for operatives who carry out onsite Labouring duties in support of Scaffolding operations. The holder of a CISRS Trainee Scaffolder or CISRS Scaffolding labourer card will have current Health and Safety knowledge and the required skills to carry out their duties in a safe manner.

    View course

  • AAT Examination (AQ2022 Exams only)

    WEDNESDAY, JULY 15 2026 | 1:00 PM

    Centre Invigilated Exam Session for AQ2022 AAT Exams at our Registered AAT Exam Centre

    View course

  • CISRS CPD Scaffolder / Advance Scaffolder Renewal

    MONDAY, AUGUST 3 2026 | 8:00 AM

    From the 1st July 2017, it is a requirement of the CISRS Training scheme, that CISRS Scaffolders and Advance Scaffolder card holders must attend a 2-day Scaffolder Refresher/ CPD course in order to renew their CISRS cards. Renewal is required every 5 years.

    View course

  • Advanced Skills Test (AST)

    TUESDAY, AUGUST 11 2026 | 8:00 AM

    The law requires that any individual wishing to erect, alter or dismantle scaffolding must be able to prove their competency. The industry-wide accepted proof of competency for operatives is to hold a CISRS Advanced Scaffolder card. Upon completion of this course, the operative will receive a CISRS Advanced Scaffolders Card. Valid for 5 years.

    View course

  • CISRS New Entrant Constructions Operatives Training Scheme (COTS)

    MONDAY, SEPTEMBER 7 2026 | 8:00 AM

    The course is for operatives who carry out onsite Labouring duties in support of Scaffolding operations. The holder of a CISRS Trainee Scaffolder or CISRS Scaffolding labourer card will have current Health and Safety knowledge and the required skills to carry out their duties in a safe manner.

    View course

  • Basic Electrical Maintenance

    MONDAY, JULY 20 2026 | 8:00 AM

    On this course, you will learn to Identify and use basic electrical components. This course covers: • Isolating and testing supplies in line with the requirements of the EaWR and GS 38 • Using common electrical test instruments safely and efficiently • Reading typical electrical drawings • Reading motor rating plates • Identifying and connecting industrial motors

    View course

  • Safe Isolation

    WEDNESDAY, JULY 22 2026 | 1:00 PM

    This course is designed to help engineers know the correct procedure to perform a safe isolation by following guidance from the BS7671 18th Edition Wiring Regulations.

    View course

  • Electronics Short Course (AUEC2-016)

    MONDAY, AUGUST 3 2026 | 8:00 AM

    This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to: Carry out the assembly of a range of electronic components such as resistors (fixed and variable), capacitors (fixed and variable), diodes, transistors and other semiconductor devices, integrated circuits (analogue and digital), miniature transformers, switches, indicators, wire links and a range of connectors, spacers and brackets to form various types of circuits.

    View course

  • Milling Short Course (AUEC2-014)

    MONDAY, AUGUST 3 2026 | 8:00 AM

    This unit identifies the training and development required in order that the learner can demonstrate that they are competent in being able to carry out the milling operations on horizontal, vertical or universal milling machines.

    View course

Need more help?

Name(Required)
Email(Required)
Please let us know what's on your mind. Have a question for us? Ask away.